- IP Rating: IP66
- Dimensions (mm): 125H x 79W x 52D)
- Door-forced-open warning
- Door-propped-open warning
- Door sensor input for anti-tailgating operation
The Seco-Larm Vandal Resistant Keypad is not only extremely durable, but also attractive due to its stainless steel face plate. It can be programmed with up to 1,100 possible user codes and up to 50 possible temporary guest codes. It features a keypad that illuminates when a button is pressed and the back light can be set to FULL, AUTO, or OFF in standby mode. The keypad features two Form C relay outputs (1A at 30VDC) - one supports 1000 users while the other supports 100 users - both can be programmed to activate for up to 99,999 seconds (nearly 28 hours). User codes can be 4-8 digits long and guest codes can be programmed for one-time or limited-time use. The keypad mounts to a standard, single-gang back box and can be programmed easily and directly from the keypad itself - no need for an external programmer. Plus, the keypad's programmable delayed egress input allows users to exit without entering a code. Furthermore, this keypad has Mantrap function for protected areas with 2 doors. This feature allows only one door to be opened at a time. Duress code signals a silent alarm if an authorized user is forced to open the door under duress.
Name Seco-Larm Vandal Resistant Keypad SKU SK-1123-SDQ Brand Seco-Larm Weight (LB) 5.0000 Voltage 12-24V AC/DC
(Size: 1.1 MB)Instructions on how to install and configure the Seco-Larm Vandal Resistant Keypad