Baldwin mortise lock case only - cylinder not supplied. Standardized heavy steel case is smooth, easy to mortise, and assures snug and solid fit in door mortise. Vital interior working parts are made of solid hot forged brass or steel for a lifetime of trouble-free operation. All lock cases are constructed of heavy gauge steel (0.093"/ 2.4mm - material) and plated with a protective rust-resistant coating to retard oxidation. All locks and strikes are designed to fit standard preparation ANSI A115.1 (face cutouts are subject to variation). Locks have adjustable forged brass lock fronts, protected by armored scalp fronts for ultimate strength and protection against tampering. The bevel of front is adjustable from flat to standard bevel of 0.025" on 2" (3mm on 51mm). Equipped with a 1" (25mm) throw forged brass deadbolt with two hardened steel inserts for maximum protection and security and anti-friction latch bolt with 0.75" (19mm) throw.
Furnished with a specially designed security strike constructed of high grade steel for ultimate strength and durability. The security strike is mortised into the wood jamb and anchored to the structural components of the opening with two 3" steel screws and covered with a finished straight lip universal strike to conceal the fasteners. Baldwin entrance 2.75˝ mortise locks are U/L listed and meet US standard UL-10C and Canadian standard CAN4 S104-M80 for survival of a 3-hour burn under positive pressure.
This is a Baldwin Estate Emergency Egress Mortise lock: latch bolt is operated by thumb piece outside and knob inside, except when thumb piece is locked by stop in front; then latch bolt by key outside and knob inside. Deadbolt by key outside and turn piece inside. When deadbolt is thrown, stop is automatically activated making outside thumb piece rigid. Inside knob retracts latch and deadbolt simultaneously but DOES NOT free outside thumb piece. When extended, deadbolt deadlocks latch bolt.
Knob-strength 0.29" (7mm) hub with two-way rotation for use with Baldwin Estate handle-set with exterior thump piece and interior knob.
- Mortise Lock Case Only (Cylinder not supplied).
- Hub to Cylinder Centers : 3.437" (87mm).
- Hub to Turn Piece Centers : 2.25" (57mm).
Name Baldwin Mortise Lock Egress Handleset x Knob 2.75" SKU 6021-000 Brand Baldwin Lock Type Threaded Cylinder Portfolio Estate Function Entrance - Emergency Egress Backset 2.75" (70mm) Forend Length 203 mm Forend Width 32 mm Case Height 5.5" (140mm) Case Depth 4" (102mm)